The clothes to wear, the preparation of bicycle inspections, the driving tips to follow. Here’s how you can help bring your motorcycle safety A-game to every ride on a motorcycle.

Rider: Security:

Here’s what you need to look for in the safest possible outfit, says Tai van Hoydonk, vice president of communications for the Motorcycle Safety Foundation.

Helmet safety

  • Style: Your safest choice is a full face helmet.
  • Rating: Make sure it is certified by the Department of Transportation. check the DOT sticker on the back. Some helmets provide a higher level of protection (see list here).
  • Security feature. Choose one with a face shield; Click on it while you are riding to protect your eyes.
  • Compliance: It is possible to have a helmet properly placed on the head. If in doubt, ask a trained professional to help you measure it.
  • Age: Manufacturers usually recommend replacing your helmet every five years (in some cases, every three years). Helmet glue, hair oils և Normal wear and tear can lead to helmet degradation.


  • Compliance: You want a comfortable fit that allows for easy hand movements.
  • Structure: Strong jackets have armor on the chest, elbows and shoulders; back protection; և Double or triple stitches.
  • Rating: The “CE” certified jacket meets the highest safety standards.
  • Additional security. Some newer jackets have built-in airbags.


  • Material: Aramid fiber is strong enough to protect your hands from asphalt.
  • Structure: Look for armor across your hands, wrists, and palms, such as a wrist strap to hold the glove in place.
  • Fingers: You will fit better և cling to the steering wheel if the gloves have curved toes with extra handle cover.


  • Compliance: Make sure the pants fit snugly, especially below the knee. Pants that attach to the jacket will help ensure that the skin is covered.
  • Structure: Look for armor in the hips, as well as extra protection for the knees and ankles, as well as internal pockets to hold the armor in place.
  • Rating: Wear CE rated pants.


  • Structure: Look for shoes with armor on the ankles, as well as protection with heels.
  • Size: Shoes should be high and fit snugly.
  • Nerves: The inside should be firm and non-slip.
  • Toes: The toe boxes should be firm. If possible, choose an extra layer of protection, as the operation of the shift lever will cause wear and tear.

Security checks
Before each walk

Watch now

About everythingHelmets

By numbers:

Helmets by numbers

The estimated number of lives of motorcyclists saved by helmets in 2016.

The estimated number of extra lives that could have been saved in 2016 if all motorcyclists wore helmets.


Percentage of cyclists in 2017 who wore DOT-compliant helmets.


The percentage of risk of death for operators that reduces helmets.

How should the helmet fit?

Here’s what motorcycle safety is all about
The Foundation recommends:

read more


Get a quote now.


Here are just a few ways to help keep your bike safe and secure. Keep in mind that bicycles can be different, some tasks may require the removal of parts to access filters or plugs. Always check your owner’s manual and / or motorcycle specialist before making any adjustments or other work.


DIY service task. Check your owner’s manual for details, but in general you will want to ride your bike for about five minutes to warm up the oil so it can drain more easily. Turn off the engine and put it under the pan. Remove the drain plug և oil filling plug և drain the oil. Then install a new oil filter, replace the drain plug if necessary, and replace the drain plug. Then refill the recommended amount with the type of oil, change the oil cap. Recycle the oil in an approved facility.

Source: Paul Olesen from DIY Moto Fix

Air filter change

DIY service task. Dirty, clogged air filters can affect the performance of your bike. Depending on the bike, the air filter may or may not be easily accessible. Achieving this may involve removing the gas tank or other parts. When you reach the ventilation box, remove, replace the filter, then reinstall everything you removed.

Source: Paul Olesen from DIY Moto Fix

Tire inspection

DIY service task. Deep steps և the right pressure are necessary for safety. Improper tire pressure can also affect your gas mileage. Check tire pressure when the tires freeze. Find the appropriate pressure in the owner’s manual (or on the side wall if the tires are not original), then use a gauge to see what the pressure is. Check tire treads by monitoring the wear indicator – a rubber head that sits in the tire grooves. When the tread is worn up to the button, replace the tire.

Source: Paul Olesen from DIY Moto Fix

Refrigerant change

DIY service task. The coolant helps keep your engine from overheating, freezing and corroding. The bicycle should be upright when you change the coolant, և you may need to remove part of the body first. Then find the drain screw, place the boiler under the engine, and remove the screw and radiator cap to ensure proper drainage. After the coolant leaks, replace the drain screw, fill the system with coolant through the funnel, replace the radiator cap, and reinsert any body you have removed. Start the engine և let it run for a few minutes, then turn it off. When it cools, take off the radiator cap և check the cooler level; Fill in if necessary.

Source: Paul Olesen from DIY Moto Fix

Chain cleaning

DIY service task. If you have a closed chain on your bike, clean it when it gets particularly dirty or as recommended by your owner. Lift the rear wheel and set the transmission to neutral. Use a fine-bristled brush to clean the chain; Then lubricate it with a specially formulated chain grease when you go back and forth by turning the wheel to get an even coverage. After a few minutes, wipe off excess cream with a paper towel.

Source: Paul Olesen from DIY Moto Fix

Anti-lock braking systems (ABS)

High-tech security option. This system uses sensors to predict when your wheels may lock, then uses it quickly to reduce the braking pressure so that they do not lock. The addition of this feature has been shown to dramatically reduce the rate of fatal accidents.

Source: Mitchell Nicholson from Essential Moto

Adjustable headlights

High-tech security option. These smart headlights help make sure you have the light where you need it when you turn. The sensors use the adjustable headlights to rotate as you turn so that the light always shines wherever you go.

Source: Mitchell Nicholson from Essential Moto

Chain / safety cable

Anti-theft feature. Locking your bike is always a good idea, even when you are just parked at home. Use a chain or safety cable to lock your bike on a sturdy object.

Source: National Insurance Crime Bureau

Ignition lock և / or alarm

Anti-theft feature. The alarm clock offers extra protection against motorcycle theft. You can also add an ignition lock or a hidden killer switch. These features may even qualify you for a discount on motorcycle insurance.

Source: National Insurance Crime Bureau

Click on the icons to read how to handle your bike in some basic situations


Safety checks to be made before each trip